Doors, pulls and hinges on existing cabinets
This service focuses on cabinet fronts and their operating hardware: handles, knobs, compatible hinges and alignment of doors or drawer fronts. Start with the symptom or desired change. A cabinet box that has separated, shifted or suffered water damage needs a broader cabinet repair review before new fronts are fitted.
Measure the hardware and its clearances
For pulls, measure the center-to-center distance between screw holes rather than the overall handle length. Record door and drawer-front thickness, and check whether a deeper pull will hit an adjacent door, appliance or corner cabinet. Keep one representative part or its model information available when comparing replacements.
Check overlay, hinges and drawer alignment
A hinge must suit the cabinet construction and the amount the door overlaps the opening. Similar-looking hinges can place the door differently or require different drilling. Before replacing a rubbing door, check the condition of its hinges, the cabinet alignment and the gap around neighboring fronts; a hardware change cannot straighten a distorted box.
Confirm the layout before drilling
Existing holes determine whether new pulls are a direct replacement. A different spacing may leave holes exposed or require an agreed repair and refinishing step. On un-drilled fronts, confirm the handle position across the complete set, including wide drawers and paired doors, before making permanent holes.
Inspect screw holes and mounting surfaces
Loose hardware may come from a stripped screw hole, damaged hinge plate area or a fastener that does not suit the front thickness. Inspect the attachment point before simply tightening the part again. Thin panels and hollow areas need a compatible fixing arrangement; cabinet hardware should not rely on improvised attachment through weakened material.
Compare finish, grip and hardware function
Choose the finish with the room’s other hardware in view, but also try the grip and clearance for fingers. Confirm whether a proposed soft-close hinge is compatible with the existing door and cabinet system. Replacement doors need both dimensional and finish review; an exact match to aged stain or faded paint may not be available.
Keep, adjust or replace the component
A door with sound material and compatible hinges may need adjustment rather than replacement. A damaged hinge recess, split front or unavailable mounting pattern may change that choice. Specify whether the aim is to fix one failing part or update the whole visible set, since mixed generations of hardware can look and operate differently.
Plan around cabinet refinishing
Agree whether hole filling, paint touch-up or refinishing is included before changing the hole pattern. Hardware removal and final fitting need to fit the finishing sequence. If the project also includes fitted woodwork elsewhere in the room, describe it separately through carpentry and shelving so it does not obscure the cabinet hardware count.
Photographs and counts that help
Send a full view of the cabinet run, close-ups of hinges and the back of a typical door, and the replacement product link. Count doors, drawers, knobs and pulls separately. Include hole spacing, any special corner hinges and which fronts rub, sag or fail to close.
Request a cabinet hardware upgrade
Contact WA-GoodHome at (223) 226-1828 or share the cabinet and hardware details. Include your Bellevue, Eastside or Greater Seattle location, the selected products and whether you want to retain the current doors. Unknown hinge or cabinet details can be checked before the upgrade scope is settled.